Archive for February, 2012

Kajang to Taylor’s University Lakeside Campus

If you have class at 8am you need to wake up early and start your journey the latest is  6.30am.

There are 3 major route that you can choose from.

  1. Lebuhraya Cheras-Kajang and Lebuhraya Persekutuan 30.7KM
    • recommended starting time is 6am
    • Total toll rate to be expected is RM1.90 (one-way journey)
  2.  Lebuh Raya Bukit Jalil 28.9KM
    • recommended starting time is 6am
    • Total toll rate to be expected is RM1.60 (one-way journey)
  3. Lebuhraya Lembah Klang Selatan and Lebuhraya Damansara – Puchong 40.5KM
    • recommended starting time is 6.30am
    • Total toll rate to be expected is RM4.20 (one-way journey)

another driving tips that you’ll gonna need is that you need to reach Bandar Sunway by 7am if you don’t want to be late for class. If you are coming from route 2 and 3 you need to reach the Puchong Toll by 7am since you are going to be stuck there for at least 30 minutes. Hope this helps and happy driving!

If you have more route please leave a comment below and I’ll be happy to put it into this post.

Advertisements

Window 7 WPA2 Authentication Step-by-Step Guide

  1. Mouse over to Network Connection Icon on the bottom right of your desktop screen and
    Click Open network and sharing center.
  2. Click “Manage wireless networks”
  3. Click “Add” then “Manually create a network profile”
  4. Make sure your settings are as below.
    1) Verify that the Network name (SSID) is set to i-Xcess
    2) Network Authentication is set to WPA2-Enterprise
    3) Data Encryption is set to AES.
    4) Check on “Start this connection automatically”
    5) Uncheck on “Connect even if the network is not broadcasting”
    6) Click on “Next” to bring you to next configuration page
  5. Click on “Change connection settings” to proceed with next configuration step
  6. Select the Security tab. Make your settings are as below.
    1) Security type is set to WPA2-Enterprise
    2) Encryption type is set to AES
    3) Verify that authentication method is set to Microsoft: Protected EAP (PEAP).
    4) Check “Remember my credentials for this connection each time I’m logged on
    checkbox”
    5) Click on Settings
  7. – Make sure to uncheck Validate server certificate.
    – Verify that the Select Authentication Method drop-down box is set to Secured password (EAP-MSCHAP v2).
    – Check “Enable Fast Reconnect”
    –  Uncheck “Enforce Network Access Protection”
    – Uncheck “Disconnect if server does not present cryptobinding TLV”
    – Uncheck “enable Identity Privacy”
  8. Click the “Configure” button. Uncheck the check box labeled “Automatically use my
    Windows Logon name and password (and domain if any).”

    Click “Ok” or “Close”.

  9. Click on “Advance settings” 
  10. Under 802.1x settings tab, Check “Specify authentication mode” and select “User authentication”, Uncheck “Enable single sign on for this network”. Click “Ok” or “Close” buttons on all the windows.
  11. Try connect to “i-Xcess”. 
  12. Connect the network called “i-Xcess” and when prompted, provide your standard
    studentID/password.